Hi Adam,
You are correct; the jumpers should be rotated as shown.
The pins do not appear to be straight across for the DRV8313. It appears the order is reversed.
If we use you example and number the pins on the launchpad from top to bottom as 1 through 6, the correct order is:
Left Right
1 Not connected
2 1
3 2
4 3
5 4
6 Not connected
Pins 1 to 4 of J4 on the DRV8313 are labeled from bottom to top.
If you want to confirm this prior to making the connections , pin 5 on the launchpad and pin 4 on the DRV8313EVM should both be GND.
You are correct; the jumpers should be rotated as shown.
The pins do not appear to be straight across for the DRV8313. It appears the order is reversed.
If we use you example and number the pins on the launchpad from top to bottom as 1 through 6, the correct order is:
Left Right
1 Not connected
2 1
3 2
4 3
5 4
6 Not connected
Pins 1 to 4 of J4 on the DRV8313 are labeled from bottom to top.
If you want to confirm this prior to making the connections , pin 5 on the launchpad and pin 4 on the DRV8313EVM should both be GND.