HI Rick,
Thanks again for confirming. I'm having such a blast with this as it is entirely new but still cautious so your confirmation is helpful. I wanted to try and figure something for myself and I'm glad I did, I learned a bunch from the exercise itself.
I just hooked up the pins to the launchpad and the PWR led came on with no pop or smoke and was able to hit debug in CCS with DRV8313_Release and the debugger reloaded right up with issue so that pin configuration seems good to me.
Thanks again for your time, have a good weekend. My weekend will now be spent trying to make my motor dance with the closed loop source.
Adam
Thanks again for confirming. I'm having such a blast with this as it is entirely new but still cautious so your confirmation is helpful. I wanted to try and figure something for myself and I'm glad I did, I learned a bunch from the exercise itself.
I just hooked up the pins to the launchpad and the PWR led came on with no pop or smoke and was able to hit debug in CCS with DRV8313_Release and the debugger reloaded right up with issue so that pin configuration seems good to me.
Thanks again for your time, have a good weekend. My weekend will now be spent trying to make my motor dance with the closed loop source.
Adam