Hi Takahashi-san,
Yes it is possible to use the DRV8844 as a 4ch low side switch.
You can connect SRC12 and SRC34 directly to VNEG if current monitoring is not required.
OCP are individually available for each channel. Please refer to section 7.3.5.1 of the datasheet for details.
Yes it is possible to use the DRV8844 as a 4ch low side switch.
You can connect SRC12 and SRC34 directly to VNEG if current monitoring is not required.
OCP are individually available for each channel. Please refer to section 7.3.5.1 of the datasheet for details.