Hi Fernando,
The schematic appears to be good. Have you checked the layout?
How are you measuring the 1.3V on the output pins? Are you using a meter or a scope? If a scope, is the output pulsing on and off?
How much current is consumed when the device is powered, nSLEEP is high, and the inputs are low?
The schematic appears to be good. Have you checked the layout?
How are you measuring the 1.3V on the output pins? Are you using a meter or a scope? If a scope, is the output pulsing on and off?
How much current is consumed when the device is powered, nSLEEP is high, and the inputs are low?