Part Number: DRV8353F
Tool/software:
In the case where the DRV835X chip is :
- Used with a dual supply architecture (VM 12V vs Vdrain between 16v-55V)
- Voltage of Power Mosfets VIN (16V-55V) different from VDRAIN.
When the IC transitions from a normal state of operation to a non energized state ( Scenario of a Safe Torque Off --> Vdrain = 0V and/or VM = 0V)
- Would it be harmful on the DRV835X pins GLx if a low power ( inferior to 50 mA) 12V PWM is applied on each of the GLX pins ?
- If it is, what are the impacts, limitations or alternatives ?
- If not, is there an expected behavior (Leakage, reverse current flow, etc) of the chip ?