Tool/software:
1. I added the missing R12 56K ohm resistor, but the VM readings reported by the GUI 2.0.0 don't match up with that measured on the "VM" terminal. For 3V on VM testpoint, the GUI reports 1.8V For 5.0V on VM the GUI repots 2.9V. so they are reporting about 60% of the actual voltage. Is the resistor value TI gave wrong, or did they change the calculation in later versions of the GUI?
2. I am using the latest DRV821x_DRV823x-EVM-GUI download on the TI website which unfortunately is still 2.0.0. There are no direct download links to 2.0.2. It then says an update is available (2.0.2), and I let it update but it never finishes, just says update in progress and I can't see any network I/O happening so I think the update code doesn't work.