BP-AM2BLDCSERVO: ISENSE_xy_VREF net voltage is not correct

Tool/software:

Hi,

  I am using BP-AM2BLDCSERVO E2 board and found the ISENSE_xy_VREF nets are all 0.17V when power on the board with 3.3V from LP-AM243x.

I checked the resistors R139 and R140 resistance which are 51kohm and 49.9kohm. This is the correct value "BP-AM2BLDCSERVO E2 - Modifications" recommended.

So could you support this issue? 0.17V reference voltage isn't good for sensing the whole range of motor phase current.

Regards,

Chen