Part Number: DRV8316C
Other Parts Discussed in Thread: DRV8316
Other Parts Discussed in Thread: DRV8316
Tool/software:
Dear Team
I am developing a servo gripper that drives multiple motors using DRV8316CR, and I am contacting you because of a problem.
I made the first board and tested it, and found that DRV8316CR is not working at all.
I checked and found that the nSLEEP terminal is open. This seems to be the problem.
So I want to connect nSLEEP(23), NC(24), AVDD(25) 3 terminals. Please let me know if 3.3V can be input to the NC terminal.
Thank you.