Hi Fabio,
Either board works. I would suggest the www.ti.com/.../DRV8301-HC-C2-KIT, although the other two would also work.
Care should be taken when stopping a motor. TVS diodes, large bulk capacitors, and other circuits can be used to limit the voltage at DRV8301.
Another board to examine is the BOOSTXL-DRV8301. While it does not meet the stated voltage specifications, it is an example of the PCB layout.
Either board works. I would suggest the www.ti.com/.../DRV8301-HC-C2-KIT, although the other two would also work.
Care should be taken when stopping a motor. TVS diodes, large bulk capacitors, and other circuits can be used to limit the voltage at DRV8301.
Another board to examine is the BOOSTXL-DRV8301. While it does not meet the stated voltage specifications, it is an example of the PCB layout.