Hi Xufeihx,
No, this cannot be done. You need approximately 60V to turn on the high side FETs. The charge pump of the DRV8701 provides this voltage.
You need a 60V gate driver. There are a few options available such as:
DRV8704
DRV8320H and DRV8320
Even with a 60V gate driver, care should be taken to avoid violating the absolute maximum voltages.
No, this cannot be done. You need approximately 60V to turn on the high side FETs. The charge pump of the DRV8701 provides this voltage.
You need a 60V gate driver. There are a few options available such as:
DRV8704
DRV8320H and DRV8320
Even with a 60V gate driver, care should be taken to avoid violating the absolute maximum voltages.