Part Number: DRV3205-Q1
Hi,
My customer is using DRV3205-Q1.
He has a issue about EEPROM CRC diagnostics.
He used the following procedure to confirm EEPROM CRC diagnostics.
But He couldn't occur "EEPROM CRC Error".
Could you give me advice how to occur "EEPROM CRC Error" at EEPROM CRC diagnostics, please?
1. Read CRCCALC register at diagnostic state
2. Write CRCCALC register to the error value which is inverted value of the read value at procedure 1.
3. Write EE_CRC_CHK bit to 1.
4. Wait EE_CRC_CHK bit = 0.
5. Confirm EE_CRC_ERR bit.
Best regards,
Shimizu