Part Number: DRV10975
Dear TI:
I use drv10975 as BLDC Drive. The Moter output power is 4W, voltage:12v.
but when i do GB4343.1 Certification test, Conducted Disturbance and Disturbance Power are all excessive.
i try add a magnetic ring to the lead line and a magnetic bead on the power input, but it doesn't work.
so i add 471 cap between three-phase and GND , But it seems doesn't work either.
Can you give me some advise on the point ,thanks a lot.
by the way: parameter as follow.
