Hi Wilson,
in the application the uC task runs at 1ms, so the delay between nSLEEP and following SPI communication is 1ms or more.
Anyway, when we analyzed the problem, we used a step by step / manual mode so the time was much more... like seconds, and the problem was still there with so long times.
Gianfranco
in the application the uC task runs at 1ms, so the delay between nSLEEP and following SPI communication is 1ms or more.
Anyway, when we analyzed the problem, we used a step by step / manual mode so the time was much more... like seconds, and the problem was still there with so long times.
Gianfranco
