Hi Rick,
Sense resistor value is 0.1ohms and Motor spec 12V@0.35A with P/N 1528-1062-ND (digikey). My guess on this is to do more on settings. During Ideal state A1HS PIN and A2LS are HIGH and LOW resp, which is intern energizing coil to get into Motor stall condition . I will share register setting once i get them.
Sense resistor value is 0.1ohms and Motor spec 12V@0.35A with P/N 1528-1062-ND (digikey). My guess on this is to do more on settings. During Ideal state A1HS PIN and A2LS are HIGH and LOW resp, which is intern energizing coil to get into Motor stall condition . I will share register setting once i get them.
