Hi Kuramochi,
It will depend on the external inputs condition. For the 100k pull downs are alway there, if in SLEEP state, the external inputs have a 0.5V voltage, that means 0.5/100k = 5uA. This is not DRV8837 pulled from its VM, but it is a system leakage in SLEEP mode. But if we can make sure the external MCU zero output or HiZ, the leakage will be removed.
Best regards,
It will depend on the external inputs condition. For the 100k pull downs are alway there, if in SLEEP state, the external inputs have a 0.5V voltage, that means 0.5/100k = 5uA. This is not DRV8837 pulled from its VM, but it is a system leakage in SLEEP mode. But if we can make sure the external MCU zero output or HiZ, the leakage will be removed.
Best regards,