Hi Angela,
The bypass capacitors for DVDD, AVDD, and GVDD should be populated and the nFAULT / OCTW pins should be pulled high. CP1 / CP2 capacitor should also be populated. GVDD can then be measured on the GVDD Pin with all the device inputs low and EN_GATE high.
The bypass capacitors for DVDD, AVDD, and GVDD should be populated and the nFAULT / OCTW pins should be pulled high. CP1 / CP2 capacitor should also be populated. GVDD can then be measured on the GVDD Pin with all the device inputs low and EN_GATE high.