Hi Team,
The customer is using DRV8834 at full step mode and their motor will move 1mm per full step. This is working perfectly fine.
However,they need to achieve 0.5mm motor movement per step. So they are trying to use half step mode, making M1 as 0 and M0 as 1. When they are
testing this, for the first pulse motor is moving, and for the second pulse motor is not any movement. they found it is working alternatively for every pulse on half step mode.
Also when they try 1/4 step mode, for the first pulse motor is moving ,and for the next 3 pulse motor is not any movement.
What is the reason? How to solve the issue?
Thanks,
Best Regards,
