hi, I am doing a DRV8301 design and using ST STP80NF70 as MOSFET, my circuit is similar with BOOSTXL-DRV8301, but the VGDD is good before RUN is activated but failed and is down to gnd after the PWM signals are applied. I have take out the two SMD FETs at BOOSTXL-DRV8301 and replaced with STP80NF70s and after a while one of the gate driving signal failed. It seems some FETs will damage drv8301.
Do any one ever use a TO-220 MOSFET for DRV8301 that Max Vds >60V Id>60A and work fine? Does any ever use EKI06108([View:https://www.semicon.sanken-ele.co.jp/sk_content/eki06108_ds_en.pdf:1230:0]) or IRF1010E（[View:http://www.irf.com/product-info/datasheets/data/irf1010e.pdf:1230:0]) with DRV8301?