Hi Milad,
The configuration shown will not work. The diodes allow the FETs to be turned on, but not off. Also the diodes can affect the VDS monitor of the DRV8711.
If you desire to create such a board, you may have to add jumpers (or zero Ohm resistors) to connect and disconnect devices.
The configuration shown will not work. The diodes allow the FETs to be turned on, but not off. Also the diodes can affect the VDS monitor of the DRV8711.
If you desire to create such a board, you may have to add jumpers (or zero Ohm resistors) to connect and disconnect devices.