Hi Rishav,
Are you operating in 6-PWM or 3-PWM mode? What are voltages at the other inputs when you measured 24 and 10.8V?
Do you have FETs connected? Have you checked that the FETs are operating properly?
What voltage are you measuring on SH_B?
Are you operating in 6-PWM or 3-PWM mode? What are voltages at the other inputs when you measured 24 and 10.8V?
Do you have FETs connected? Have you checked that the FETs are operating properly?
What voltage are you measuring on SH_B?