Part Number: DRV8302
I am working wiht the following simple schematic:
I am using PVDD at 24V. When I apply 5V to channels A and C, the voltage output at GH_A and GH_C give the correct voltage output (31.0 V). However, when I apply 5V to INH_B, the voltage output comes to be around 24V at GH_B as well as SH_B. Also when I put INH_B to ground, GH_B gives an output of around 10.8V. There is also no over-current or fault indication. What might be causing this?